Cost-effective Full PoE+ Power Solution Ideal for Hardened Environment
Featuring Plug and Play designed to be installed in heavy industrial demanding environments, the ISW-504PT is a PLANET Industrial-grade, DIN-rail type Unmanaged Fast Ethernet PoE+ Switch with 4 10/100BASE-TX PoE+ ports, and 1 additional Fast Ethernet interface for video uplink.
The ISW-504PT is designed with redundant power system and is able to operate reliably, stably and quietly in any hardened environment without affecting its performance. It comes with a total power budget of up to 120 watts for different kinds of PoE applications and operating temperature ranging from -40 to 75 degrees C in a rugged IP40 metal housing.
Extension of Ethernet Data Transmission Distance
The ISW-504PT has a built-in solid DIP switch providing “Standard”, "VLAN" and “Extend” operation modes. By default, the ISW-504PT operates as a normal IEEE 802.3af/at PoE+ Switch in the “Standard” operation mode.
The "VLAN" operation mode features with port-based VLAN function helps to prevent the IP camera’s multicast or broadcast storm from influencing each other.
In the “Extend” operation mode, the ISW-504PT operates on a per-port basis at 10Mbps full duplex operation and can support 25-watt PoE power output over a distance of up to 250 meters, overcoming the 100-meter limit on Ethernet UTP cable.
Convenient and Reliable Power System
To facilitate the 802.3at PoE+ usage with commonly used 12~48V DC power input for transportation and industrial-level applications, the ISW-504PT adopts 12~48V DC to 54V power boost technology to solve power source issue but does not require special power supplies. The ISW-504PT provides an integrated power solution with a wide range of voltages (12~48V DC) for worldwide operability. It also provides dual-redundant, reversible polarity 12~48V DC power supply inputs for high availability applications.
Environmentally Hardened Design
With the IP40 metal industrial case, the ISW-504PT provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets without air conditioning. It features a ventilated construction in which a cooling fan is not necessary, thereby making its operation noiseless. Being able to operate under the temperature range from -40 to 75 degrees C, the ISW-504PT can be placed in almost any difficult environment.
The ISW-504PT provides contact discharge of ±5KV DC and air discharge of ±5KV DC for Ethernet ESD protection. It also supports ±5KV surge immunity to improve product stability and protects users’ networks from devastating ESD attacks, making sure the flow of operation does not fluctuate.
Safe and Easy PoE Network Deployment
Carrying both Ethernet data and power simultaneously, the ISW-504PT reduces cabling requirements and eliminates the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. It helps users to utilize just one Ethernet cable to install and deploy IP camera, wireless AP or VoIP phone more efficiently and cost-effectively.
Industrial-grade PoE+ Switch for Building Automation and Security
Suitable for buildings where security is strictly enforced, the ISW-504PT, with four Fast Ethernet 802.3at PoE+, in-line power interfaces, can easily build a power that can centrally control an IP phone system, IP surveillance system, and wireless AP group in the harsh Industrial environment. For instance, 4 PoE IP cameras or PoE wireless APs can be easily installed for surveillance demands or a wireless roaming environment in the industrial area can be built. Without the power-socket limitation, the ISW-504PT makes the installation of IP cameras or wireless APs easier and more efficient.
Perfect Integration Solution for IP PoE Camera and NVR System
The ISW-504PT provides four 10/100BASE-TX 802.3at PoE+ ports which can offer sufficient PoE power to 4 PoE IP cameras at the same time. In addition, with the 10/100BASE-TX interfaces, the ISW-504PT can connect to a core fiber switch and send video streams to an NVR and monitoring center. Through the high-performance switch architecture, the ISW-504PT facilitates the recorded video files from the 4 PoE+ IP cameras to be saved in the NVR systems. Furthermore, the NVR systems can be controlled and monitored in both the local LAN and the remote site via Internet. The ISW-504PT undoubtedly brings an ideal secure surveillance system at a lower total cost.
Power over Ethernet
Industrial Case and Installation
|Fast Ethernet Copper Ports||Five 10/100BASE-TX RJ45 auto-MDI/MDI-X ports (Port-1 to Port-5)|
|PoE Injector Port||Four ports with 802.3af/at PoE+ injector function (Port-1 to Port-4)|
|Switch Throughput@64 bytes||0.74Mpps @64 bytes|
|MAC Address Table||2K entries|
|Flow Control||IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
|Jumbo Frame||10 Kbytes|
|DIP Switch (Port-1 to Port-4)||Standard mode: 30-watt PoE transmission distance of 100m at speed of 10/100Mbps
VLAN mode: "Port-based VLAN Protection" where ports can be isolated from each other via one DIP switch. Only Port-5 can visit other ports.
Extend mode: 25-watt PoE transmission distance of 250m at speed of 10Mbps
|LED Indicators||3 x LED for System and Power:
2 x LED for PoE Copper Port (Port-1~Port-4):
1 x LED for 10/100TX Copper Port (Port-5):
4 x LED for PoE Usage
|Connector||Removable 6-pin terminal block
|Alarm||One relay output for power failure.
Alarm relay current carry ability: 1A @ 24V AC
|Power Requirements||12~48V DC, 7A (max.)|
|Power Consumption/ Dissipation||3.7 watts, 12.6 BTU (Standby without PoE function) at DC 12V power input
70 watts, 238.8 BTU (Full loading with PoE function) at DC 12V power input
4.6 watts, 15.7 BTU (Standby without PoE function) at DC 24V power input
105.1 watts, 358.6 BTU (Full loading with PoE function) at DC 24V power input
4.8 watts, 16.4 BTU (Standby without PoE function) at DC 48V power input
136.8 watts, 466.8 BTU (Full loading with PoE function) at DC 48V power input
|Dimensions (W x D x H)||50 x 85.1 x 135 mm|
|ESD Protection||5KV DC|
|Enclosure||IP40 metal case|
|Installation||DIN-rail kit and wall-mount kit|
|Power over Ethernet|
|PoE Standard||IEEE 802.3at Power over Ethernet Plus/PSE|
|PoE Power Supply Type||End-span|
|Power Pin Assignment||1/2 (+), 3/6 (-)|
|PoE Power Output||Per port 54V DC , max. 36 watts|
|PoE Power Budget (max.)||60W @12V DC input
90W @24V DC input
120W @48V DC input
|Max. Number of Class 2 PDs||4|
|Max. Number of Class 3 PDs||4|
|Max. Number of Class 4 PDs||4|
|Regulatory Compliance||FCC Part 15 Class A, CE|
|Stability Testing||IEC 60068-2-32 (free fall)
IEC 60068-2-27 (shock)
IEC 60068-2-6 (vibration)
|Standards Compliance||IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3x Flow Control and Back Pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
|Operating Temperature||-40 ~ 75 degrees C|
|Storage Temperature||-40 ~ 85 degrees C|
|Humidity||5 ~ 95% (non-condensing)|
|2019-06-04||3.1||Update pictures and modify description|
|2018-10-12||3.0||Initial release for ISW-504PT(V3)|
|ISW-514PTF||Industrial 4-port 10/100TX 802.3at PoE+ plus 1-Port 100FX Ethernet Switch|
|IPOE-E202||Industrial 1-Port 802.3at PoE+ to 2-Port 802.3af PoE Extender|
|POE-E101||IEEE 802.3af Power over Ethernet Extender|
|POE-E201||IEEE 802.3at Power over Gigabit Ethernet Extender|
|POE-E202||1-Port 802.3at PoE+ to 2-Port 802.3af/at Gigabit PoE Extender|
|IPOE-162S||Industrial IEEE 802.3at Gigabit High Power over Ethernet Splitter|
|POE-161S||IEEE 802.3at Gigabit Power over Ethernet Plus Splitter|
|POE-162S||IEEE 802.3at Gigabit Power over Ethernet Plus Splitter|
|ICA-E3550V||5 Mega-pixel Bullet IR PoE IP Camera with Extended Support|
|VIP-2140PT||High Definition Color PoE IP Phone with Dual Display|
|Industrial 5-Port 10/100TX Ethernet Switch with 4-Port 802.3at PoE+|