PLANET GSD-1002M is an 8-port 10/100/1000Mbps + 2-port 100/1000X SFP Managed Desktop Switch specially designed to build a reliable full Gigabit backbone to transmit and forward data to remote network through fiber optic. It provides 8-port 10/100/1000BASE-T copper and 2 extra 100/1000BASE-X SFP fiber optic interfaces with dual power system. Besides support for 20Gbps switch fabric to handle extremely large amounts of video, voice and important data in a secure topology, the GSD-1002M provides user-friendly but advanced IPv6 / IPv4 management interfaces and abundant L2/L4 switching functions. It is the best investment for businesses/SOHOs expanding or upgrading their network infrastructure.
Cybersecurity Network Solution to Minimize Security Risks
The GSD-1002M supports SSHv2 and TLS protocols to provide strong protection against advanced threats. It includes a range of cybersecurity features such as DHCP Snooping, IP Source Guard, Dynamic ARP Inspection, 802.1x port-based network access control, RADIUS and TACACS+ user accounts management, SNMPv3 authentication, and so on to complement it as an all-security solution.
Redundant Ring, Fast Recovery for Critical Network Applications
The GSD-1002M supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP) into customer’s network to enhance system reliability and uptime in various environments.
Spanning Tree Protocol and Dual Power Input for High Availability Network System
The GSD-1002M features strong rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates Spanning Tree Protocol (802.1s MSTP), auto loop protection and dual power input system (PoE In + 12V DC) into customer’s automation network to enhance system reliability and uptime. In the example below, PoE power has failed with dropped cable and DC power will run hardware failover function automatically to keep powering the switch without any loss.
IPv6/IPv4 Dual Stack Management
Supporting both IPv6 and IPv4 protocols, the GSD-1002M helps the SMBs to step in the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 network is set up.
Robust Layer 2 Features
The GSD-1002M can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN and Q-in-Q VLAN, Multiple Spanning Tree protocol (MSTP), loop and BPDU guard, IGMP snooping, and MLD snooping. Via the link aggregation, the GSD-1002M allows the operation of a high-speed trunk to combine with multiple ports, and supports fail-over as well. Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2 protocol included to help discover basic information about neighboring devices on the local broadcast domain.
Efficient Traffic Control
The GSD-1002M is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast/multicast storm control, per port bandwidth control, IP DSCP QoS priority and remarking. It guarantees the best performance for VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources.
PLANET GSD-1002M offers comprehensive IPv4/IPv6 Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X port-based user and device authentication, which can be deployed with RADIUS and TACACS+ to ensure the port level security and block illegal users. With the protected port function, communication between edge ports can be prevented to guarantee user privacy. Furthermore, Port security function allows to limit the number of network devices on a given port.
Friendly and Secure Management
For efficient management, the GSD-1002M is equipped with Command line, Web and SNMP management interfaces.
Moreover, the GSD-1002M offers secure remote management by supporting SSHv2, TLSv1.2 and SNMP v3 connections which encrypt the packet content at each session.
Flexibility and Long-distance Extension Solution
The two mini-GBIC slots built in the GSD-1002M support SFP auto-detection and dual speed as it features 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceivers to uplink to backbone switch and monitoring center in long distance. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and up to above 10/20/40/60/80/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.
Handheld Size for FTTD Solution
The GSD-1002M provides high-performance edge service and plug-and-play design for FTTD (Fiber to the Desktop) solutions. FTTD service is fiber optic cabling with reliable and expandable, lower-cost wiring architectures, and long distance capability. The GSD-1002M supports dual-speed, 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules to connect fiber access point, with high flexibility to be installed in communication closet or major computer room for SMBs.
ITU-T G.8032 ERPS with PoE IP Surveillance System for SMBs/Workgroups
The GSD-1002M features strong rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology into customer’s automation network to enhance system reliability and uptime.
Extending Network Infrastructure for SOHOs, SMBs and Workgroups
Since port 8 of the GSD-1002M provides PoE PD power in-line and 12V DC in interface, it can obtain PoE power from any 802.3af/at PoE PSE equipment. The GSD-1002M is with non-blocking design and handheld size, and extends 8-port 10/100/1000Mbps Gigabit Ethernet and 2-port extra 100BASE-FX/1000BASE-SX/LX SFP fiber-optic modules, bringing network infrastructure higher flexibility but lower in cost.
Plug-and-Play for FTTD Solution
The GSD-1002M supports free configuration and free grounding, and provide high-performance edge service. To build the network infrastructure with an easily and quickly installed option, it can decrease attenuation and crosstalk issues for zero-loss data transfer.
Layer 2 Features
Quality of Service
|Copper Ports||8 x 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X port|
|SFP/mini-GBIC Slots||2 100/1000BASE-X SFP interfaces
Supports 100/1000Mbps dual mode and DDM
|Reset Button||< 5 sec: System reboot
> 5 sec: Factory Default
10/100/1000T RJ45 Interfaces (Port 1 to Port 8):
1000Mbps (Orange), LNK/ACT (Green)
100/1000Mbps SFP Interfaces (Port 9 to Port 10):
1000Mbps (Orange), LNK/ACT (Green)
|Thermal Fan||Fan-less design|
|Power Requirements||IEEE 802.3af/at PoE 48V ~ 56V DC in-line power
12V DC power adapter
|ESD Protection||6KV DC|
|Power Consumption / Dissipation||10.9 watts / 37.2 BTU|
|Dimensions (W x D x H)||191 x 86 x 26 mm|
|Address Table||8K entries|
|Shared Data Buffer||4.1 megabits|
|Flow Control||IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
|Jumbo Frame||10K bytes|
|Layer 2 Functions|
|Port Mirroring||TX / RX / Both
|VLAN||802.1Q Tagged VLAN
Up to 256 VLAN groups, out of 4094 VLAN IDs
802.1ad Q-in-Q tunneling
Private VLAN (Protected port)
|Link Aggregation||IEEE 802.3ad LACP and static trunk
Supports 8 groups of 8-port trunk
|Spanning Tree Protocol||STP / RSTP / MSTP|
|IGMP Snooping||IGMP (v2 / v3) Snooping
Up to 256 multicast groups
|MLD Snooping||MLD (v1 / v2) Snooping, up to 256 multicast groups|
|QoS||8 mapping ID to 8 level priority queues
802.1Q VLAN tag
DSCP field in IP Packet
Traffic classification based, Strict priority and WRR
|Ring||Supports ERPS, and complies with ITU-T G.8032|
|Access Control List||IPv4/IPv6 IP-based ACL/MAC-based ACL|
|Port Security||IEEE 802.1X – Port-based authentication
Built-in RADIUS client to co-operate with RADIUS server
RADIUS/TACACS+ user access authentication
|MAC Security||IP-MAC port binding
Static MAC address
|Enhanced Security||DHCP Snooping and DHCP Option82
STP BPDU guard, BPDU filtering and BPDU forwarding
DoS attack prevention
IP source guard
|Basic Management Interfaces||Web browser/Telnet/SNMP v1, v2c|
|Secure Management Interfaces||SSHv2, TLS v1.2, SNMP v3|
|System Management||Firmware upgrade by HTTP/TFTP protocol through Ethernet network
PLANET Smart Discovery Utility
PLANET NMS System/CloudViewer
|Event Management||Remote/Local Syslog
|SNMP MIBs||RFC 1213 MIB-II
RFC 1215 Generic Traps
RFC 1493 Bridge MIB
RFC 2674 Bridge MIB Extensions
RFC 2737 Entity MIB (Version 2)
RFC 2819 RMON (1, 2, 3, 9)
RFC 2863 Interface Group MIB
RFC 3635 Ethernet-like MIB
|Regulatory Compliance||FCC Part 15 Class B, CE|
|Standards Compliance||IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3x Flow Control and Back Pressure
IEEE 802.3ad Port Trunk with LACP
IEEE 802.1D Spanning Tree protocol
IEEE 802.1w Rapid Spanning Tree protocol
IEEE 802.1s Multiple Spanning Tree protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN Tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3af (Power over Ethernet)
IEEE 802.3at (High Power over Ethernet)
RFC 768 UDP
RFC 783 TFTP
RFC 793 TCP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP version 1
RFC 2236 IGMP version 2
RFC 3376 IGMP version 3
RFC 2710 MLD version 1
RFC 3810 MLD version 2
ITU G.8032 ERPS Ring
|Operating||Temperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
|Storage||Temperature: -20 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
|2021-07-09||1.305b210628||Functions added -
(1) Added ERPS ring support.
(2) Added enhanced cybersecurity support.
(3) Added PLANET CloudViewer app and NMS controller support.
(4) Supports SNMP LLDP MIB.
|2015-02-26||1.0b150211||Supports auto mode for SFP slots.
Bug fixed – SNMP configuration could not be saved after reboot.
|2014-08-14||1.1||Add QR cord.|
|8-Port 10/100/1000Mbps + 2-Port 100/1000X SFP Managed Desktop Switch|